A wide variety of Bagasse Conveyor Roller Chains are available for selection. All are manufactured from high quality steel and heat treated to obtain optimum characteristics of strength and wear resisitance in Bagasse Conveyor chain side bars are manufactured of EN-8,EN-9,EN-19. Side bars are subjected to operation like blanking,piercing & grinding and then hardened & tempered to avoid linear elongation & to get better strength,followed by short penning to improve the fatigue strength.

Pins and bushes are of EN-24,EN-351,EN-353 & SS-410 according to the requirements of respected clients or based on load requirement and working conditions.every care is taken into comsideration for the chains to perform successfully in the hazadorous conditions under which these chains are to be operate. All the parts are  ground to be close tolerances  to achieve the maximum accuracy and heat treated and carburized for optimum wear resistance and increased.pins and bushes are precisely machined followed by heat treatment and grinding/polishing




AS2 attachments

F type attachments

Lug only attachments

* The tabular dimensions and weights are approximate and are not binding. Design improvements may result in variation from the published figures and verification is recommended.

Translate »